Services
Technical engineering support for industrial risk and compliance.
ExConform supports manufacturers, OEMs, integrators, plant operators and engineering teams across product conformity, explosion safety, process safety, functional safety and technical training. Projects can focus on one technical discipline or combine several where equipment, plant and responsibilities overlap.
Start with the problem, not the service name.
Select the situation that most closely matches your project. This identifies the most likely starting discipline; connected services can then be considered where engineering interfaces overlap.
CE / UKCA Conformity
Suitable where the main question is whether machinery or industrial equipment satisfies the applicable conformity route, responsibilities and technical evidence requirements.
Common triggersDSEAR / ATEX & Hazardous Area Classification
Suitable where flammable gases, vapours, liquids or combustible dust may create an explosive atmosphere and the release, zoning and ignition risks need to be assessed.
Common triggersProcess Safety
Suitable where the concern is a process deviation, loss of containment, abnormal operating condition or wider major-hazard scenario requiring structured assessment.
Common triggersFunctional Safety
Suitable where risk reduction depends on an instrumented or machinery safety function and its required performance, architecture or verification needs to be established.
Common triggersTechnical Training
Suitable where engineers, safety teams or compliance personnel need structured understanding of the technical requirements they are expected to apply.
Common triggersWhich services are most relevant to your role?
ExConform supports manufacturers, integrators, operators and engineering teams at different points in the project lifecycle. The matrix shows how commonly each service relates to each client group.
A consistent route from uncertainty to documented action.
The technical method changes between conformity, hazardous areas, process safety and functional safety, but the engineering workflow remains consistent.
Establish the system boundary, intended use, interfaces, operating conditions and the decision that needs to be made.
Review drawings, technical evidence, applicable requirements, hazards, assumptions and existing safeguards.
Apply the relevant conformity, risk, hazardous-area or functional-safety methodology.
Provide clear findings, engineering justification and prioritised practical actions.
Five connected capability areas.
Each service can be commissioned independently. Expand the technical scope below to see typical work packages and outputs, or follow the service link for the detailed capability page.
CE / UKCA Conformity
Conformity support for machinery, industrial equipment, assemblies, imported machinery and modified systems.
Typical scope & outputs
- Product and machinery status review
- Applicable conformity route
- Machinery risk-assessment support
- Supplier documentation review
- Integration and modification review
- Regulatory route summary
- Compliance-gap register
- Technical evidence review
- Risk-reduction actions
- Documentation action plan
DSEAR / ATEX & Hazardous Area Classification
Explosion-risk assessment for workplaces and industrial processes involving flammable gases, vapours, liquids or combustible dust.
Typical scope & outputs
- DSEAR assessment
- Hazardous Area Classification
- Gas / vapour and dust zoning
- Ignition-source assessment
- Ventilation and release review
- Explosion protection review
- DSEAR assessment documentation
- HAC schedules and drawings
- Basis-of-safety recommendations
- Ignition-risk findings
- Equipment-suitability actions
- Prioritised risk-reduction measures
Process Safety
Structured assessment of process hazards, deviations, safeguards and major-accident risk across industrial facilities and projects.
Typical scope & outputs
- HAZID studies
- HAZOP facilitation
- LOPA assessment
- Bow-Tie review
- Safeguard assessment
- COMAH support where applicable
- Structured study records
- Causes and consequences
- Safeguard assessment
- Action register
- Risk-reduction recommendations
- Supporting technical justification
Functional Safety
Assessment and verification of safety-related control functions for machinery and process applications.
Typical scope & outputs
- SIL / PL requirement assessment
- Safety-function definition
- Sensor, logic and final-element review
- Architecture assessment
- Verification support
- Validation support
- Risk-reduction target
- Defined safety function
- Architecture findings
- Verification results
- Validation requirements
- Technical action register
Technical Training
Practical technical courses for engineering, safety and compliance teams, delivered in English or German.
Training scope
- CE / UKCA conformity
- Machinery compliance
- ATEX equipment compliance
- DSEAR / ATEX workplace requirements
- Hazardous Area Classification
- Functional safety fundamentals
- Engineering-focused content
- Practical examples
- Worked scenarios
- Company-specific examples where agreed
- English or German delivery
- Course documentation
CPD accreditation in progress.
ExConform is currently undergoing accreditation with The CPD Standards Office for its technical training provision.
The difficult questions often sit between disciplines.
The services are intentionally connected. One study often creates the technical input for the next stage of assessment.
Technical evidence needs to connect with the real equipment and process.
Drawings, calculations and documentation are important, but engineering decisions also depend on the actual equipment, installation, operating environment and interfaces between systems.
Conformity & technical evidence
DSEAR / ATEX & HAC
Process Safety
Functional Safety
Technical Training
Start with the equipment, process or technical problem.
Tell us what is being designed, supplied, modified or assessed. We can identify the most appropriate conformity, DSEAR / ATEX, process-safety, functional-safety or training route.